Need a power sequencer? Here’s one that sequences as many as 144 voltage rails and fits in an Intel® MAX® 10 FPGA or MAX® V CPLD

CPUs, SoCs, FPGAs, and ASICs generally need carefully timed sequencing of voltages on their various power supply rails to safely power up and power down. You can fit a sophisticated, modular power sequencer that controls as many a 144 power rails with configurable power-on and power-off sequencing and timing for each rail inside of an Intel® MAX® 10 FPGA or MAX® V CPLD. Because these Intel MAX programmable logic devices are often used for many board-management functions, the incremental cost for adding power sequencing to your design using these devices can be as low as zero if you are already using one of these devices to implement other functions.

Want more details? Watch this 5-minute video.

 

 

Notices & Disclaimers

Intel technologies may require enabled hardware, software or service activation.

No product or component can be absolutely secure.

Your costs and results may vary.

© Intel Corporation. Intel, the Intel logo, and other Intel marks are trademarks of Intel Corporation or its subsidiaries. Other names and brands may be claimed as the property of others.

Published on Categories Max 10Tags
Steven Leibson

About Steven Leibson

Be sure to add the Intel Logic and Power Group to your LinkedIn groups. Steve Leibson is a Senior Content Manager at Intel. He started his career as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He’s served as Editor in Chief of EDN Magazine and Microprocessor Report and was the founding editor of Wind River’s Embedded Developers Journal. He has extensive design and marketing experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.