Free, On-Demand, Online PCB Design Course for Intel® Agilex™ FPGAs and SoC FPGAs

When you incorporate an FPGA into your design, you’re adding a powerful design element into the mix. Intel® Agilex™ FPGAs and SoC FPGAs combine the power of heterogeneous architecture, transceiver leadership, and programmable software to deliver higher silicon integration, smaller form factor, and energy efficient compute acceleration for applications from the edge to cloud. However, you do need to get the device properly placed and connected on your PCB to take full advantage of the devices’ performance and flexibility.

There’s an art and a science to getting an FPGA perfectly integrated into your board layout and now you can take advantage of a free, on-demand, 38-minute online course that will teach you some of that art and science, specifically for Intel Agilex FPGAs and SoC FPGAs. The course covers significant topics such as:

  • A new methodology for designing the critical power delivery network with decoupling considerations
  • Thermal design and typical cooling solutions
  • Board layout techniques with a focus on the Intel Agilex FPGAs’ hex ball pattern
  • Power considerations including Intel® Enpirion® Power solutions

Click here for more information and to register for the online course.


Notices & Disclaimers

Intel technologies may require enabled hardware, software or service activation.

No product or component can be absolutely secure.

Your costs and results may vary.

© Intel Corporation. Intel, the Intel logo, and other Intel marks are trademarks of Intel Corporation or its subsidiaries. Other names and brands may be claimed as the property of others.


Published on Categories Agilex, EnpirionTags ,
Steven Leibson

About Steven Leibson

Be sure to add the Intel Logic and Power Group to your LinkedIn groups. Steve Leibson is a Senior Content Manager at Intel. He started his career as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He’s served as Editor in Chief of EDN Magazine and Microprocessor Report and was the founding editor of Wind River’s Embedded Developers Journal. He has extensive design and marketing experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.