At the Spring 2009 Intel Developer Forum (IDF) in Beijing, Intel premiered a prototype demonstrating Group Scheduling, a technology to increase the capacity of VoIP in 802.16m, next-generation WiMAX networks. At IDF we demonstrated the reduction in size of the DL-MAP (management overhead information) for VoIP traffic with group scheduling. Here we demonstrate how the reduction in the MAP overhead leads to capacity gains, thereby supporting larger number of VoIP calls in next-gen WiMAX networks.
Since IDF we have extended our prototype to include the PHY layer in the BS and the MS. Additionally, the use of a channel emulator enables us to model actual cellular channel conditions. The prototype includes three WiMAX CPE devices each capable of supporting multiple simultaneous VoIP flows, similar to an actual WiMAX cell. The video below describes the extensions and the results from the prototype. With the setup we see that the reduction in MAP overhead with group scheduling leads to up to 40% increase in VoIP capacity. This improvement is over and above additional gains achieved by the 802.16m specification, which will increase peak data rates up to 10x more than today’s wireless networks over time.
Recent Comments
- scott skillman on Reinventing DRAM with the Hybrid Memory Cube
- Stephan Herhut on Building a Computing Highway for Web Applications
- MySchizoBuddy on Building a Computing Highway for Web Applications
- Hadar on Building a Computing Highway for Web Applications
- JD on Reinventing DRAM with the Hybrid Memory Cube


Categories


Tags
#IntelR&Dday
80-core
@idf08
Cloud Computing
Ct
CTO
DARPA Urban Challenge
energy efficient
Future Lab
Future Lab Radio
IDF
IDF2008
IDF 2010
Immersive Connected Experiences
innovation
Intel
Intel Labs
Intel Labs Europe
Intel Research
ISSCC
Justin Rattner
many core
MID
mobility
multi-core
parallel computing
parallel programming
programming models
radio
Rattner
ray tracing
research
Research@Intel
Research At Intel Day
Robotics
security
silicon photonics
software development
Stanford
technology
terascale
virtual worlds
Wi-Fi
WiMAX
wireless



Cool! Which BS & MS boards are you using for your experiments? Which Channel emulator are you using?
@RBG – The BS is a combination of an in-house MAC components and PHY components from PicoChip. The MS uses Intel development boards. The channel emulator is from Propsim.
Good. How about its performance for non-VoIP service? A complete test result will be more convincing. Why not see this proposal for 802.16 specification improvement from Intel on WiMax Forum?